Terminal Block Accessories Brass - Brass stamping parts – S.W ELECTRIC

Quality key points: material and surface treatment,

brass stamping parts can be applied to automatic assembly.  

Specifications: thickness in 1.0mm, 0.8mm brass material; raw material status: higher requirements for raw materials, can be inner layer.  

Application Switches: The right size of brass and the finish of the edges should be smooth. In terms of switches, 1 road 1 way, 1 way 2 way, 2 way 1 way, 2 way 2 way, 2 way 2 way, 3 way 1 way, 3 way 2 way are mainly used. Switch details: 10A, 16A, 20A, 32A, 45A.  Critical brass stampings vary depending on ampere requirements. Thickness differences, molding design. For some market uses, brass material is only used for fixed parts. The other parts should be made of copper.  

The surface treatment is generally yellow, and some of it needs to be silver plated. The thickness of the silver will be carried out according to the drawings and market requirements or test standards.  The material has a medium hardness, and for the above photo items, the moving contacts are the key to the complete work of the product. Therefore, the size of brass parts should be controlled at 0.02-0.01mm.

For terminal connectors, the above items are iron-plated nickel materials. If there are higher requirements, it can be brass material. We can also replace the complete terminal section in the finishing of brass connectors with lathes. It will help the temperature rise a little.  

Tools for brass stampings. We have our own design and run fully automatically. Speed is controlled at 80 people per minute. For some items with fewer angles, the speed can be higher Quality description: Dimensional tolerances, molding status Switches top brands: legrand, AVE, VIMAR.