2 Way Distribution Box - Phosphorescent stamping – S.W ELECTRIC

Quality key points: material grade and hardness, molding tolerances
The drawing is located at the extension dxf ,dwg . or igs, step in the file.

Specification: Thickness in 1.2mm. concerning. DP switch, the material should be 1.5mm, or some silver inlay. For this treatment, the cost will be higher. If the cost is controlled, the finished product is tinned accordingly. Raw material condition: It will be rolled or flake.

Application: DP SWITCH: Product design for this material. More than 10,000 life tests can be guaranteed. The temperature rise can also be well controlled. The photos above are for design and shape only.

For electric fields, how should we improve the electrical characteristics? We can obtain phosphorescent materials from the design. This material is also recommended for some connecting areas. Because it will improve the touch state. They can reduce the resistance, but the difference between the two parts is very small. For this material, if it is welded with silver, the surface should be treated well and cleaned. And the silver contacts will weld well on it. Electrical characteristics will take to the next level.

In actual production, how to use phosphor materials to make metal parts? The punching machine is large, the speed is slow, and the key is the progressive die. In general, if they are used in electronics, finishing must be fring-free, burr and dimensional tolerances strictly controlled according to drawings and designs.

How about the working life for tooling to make the metal parts / stamping part ? As the inside part is design as insertable . If some finishing is with metal flash , we have to replace new one . There is no relation with working life of tooling .