Short description: B22 threaded bracket, product side hole
Mold material: H13
Key points of product quality: design according to customer requirements. If the engineering team is soft but not strong. We will put product and scrap together. For complete products, they may drop by 100% due to weight.
Quality :For pin size, it must be controlled according to the connector size. Additionally, we reserve possible replacement options. Because of the market position of the product, sometimes it's in a bigger connector, like a 5x5x8 brass connector, we should have bigger pins for the finished product.
Design :We combine round parts to reduce the labor cost of assembly and the injection cost of round parts;Mold details:The number of cavities is 8. The mold becomes longer. So we have extra pins for the sliding part. We will also have the swipe position
Possible mold parts: pins and ejectors
FAQ :
How many lenses does the mold design have? Typically, it is designed for 1 million rounds. For this working life, it comes from material properties. In other words, real running will be different. Seems like the mold is well and professionally maintained. Mold life is longer. If it fails, the lifespan will be shorter.
Why is the price of the same product so different? Generally speaking, it is from material, finish, design. Also experience. Due to the special mold, mass production is not possible. But we have to use standard parts from top brand companies. Like DME, HASSCO, LKM. There are also some critical parts that should be done by a good machine.
