Factory Cheap Hot Adaptor Pin With Sleeve - Copper Stamping Parts – S.W ELECTRIC

Material : Copper

Quality Key Point: For dimensional finishing, this is a normal key point, but hardness is another key point.

Raw material shape:

Application: Is the key component of the socket, is the moving part of the switch.

Quality control:

1) the working size and working area of the part;

2) from the mass production, the need for fixture control, if the size control is 0.02mm, it can also be controlled by the scanner; if the product design is completed, we will 100% follow all the details of the drawing.

Production time: 35 days after confirmation;

FAQ :

How to check the quality of the material? The quick way is to fold the raw material several times and check the final state. If there is no breaking line , it will be suitable for raw material .

From the outside, what’s the difference between good and bad? The rough approach is to look at the cutting area.

Can I have samples before mass production? Yes, we have this crucial step. We will ensure samples from the same grade of material and final progressive die. We also control finishing, such as plating. For mass production, we order raw materials only once, not twice. It will help with our dimensional control. According to normal practice, the size is about 0.02 plus or minus, and the material is about 0.8mm.

If there is a problem with the plastic part, it is necessary to correct the dimensions from the copper stamping part, is this possible? Possibly. But not 3 times modified. As we concentrate again and again.